Re: BSP 1.0.1 fails on OpenCV 2.4.9 during build
Thanks Alex, I appreciate it. Where should I copy that file? I tried adding it to the open-cv folder in recipes-support and renaming it from .bb.disabled to .bb, but bitbake complains that it's...
View ArticleRe: USB Ethernet works! But no IP address via DHCP
Any suggestions for args to udhcpc? It spins not doing much:udhcpc (v1.18.5) startedSending discover...Sending discover...Sending discover.../usr/share/udhcpc/default.script: Lease failed: Sending...
View ArticleRe: Intel NUC D54250WYKH2 BIOS does not detect SSD
Has there been any progress on this issue? I am having the same problem and my D34010WYKH has already been replaced once, the new one is only marginally better and recognizes the installed SSD about...
View ArticleRe: WiFi Latency
I loaded the latest image edison-image-ww36-14 and the wifi issue seems to have gone away. I had this issue and know my firmware was quite out of date. Maybe the same for the original poster. I...
View ArticleCad application for opening Edison_arduino_5_0826.brd file
I'm trying to open the Edison_arduino_5_0826.brd file that can be found on the Software & Documentation page, which I'm assuming is the board layout for the Arduino board, but I can't find a cad...
View ArticleRe: Graphics Control Panel Right-Click Menu causes Windows Explorer Memory Leak!
I identified the cause of the problem.See in the picture above, this is the look of Right-Clicks menus of Intel Graphics when I install the driver version "10.18.10.3277" downloaded from the DELL...
View ArticleRe: Preventing Cypress GPIO expander from going to sleep mode.
Hi Diego, Thanks a lot. Yes I tried it, It gives a kernel warning, if gpio_set_value() is used, instead requires use of gpio_set_value_cansleep(). This issue was reported in the following thread,...
View ArticleRe: Intel AC7260 problems
Is there a way to get this version from intel directly? My machine did not come with this card, I purchased it separately. intel.com seems to have only 17.1.0... Found the 17.12 driver on the lenovo...
View ArticleRe: Does the DC P3700 work in a PCI-e 2.0 slot?
Thanks Warren, Do you know if I need a system with UEFI 2.3.1 to support the DC3700 if I DON'T need it to boot? We are fine with booting off of our normal harddrives, and want to use the DC3700 for db...
View ArticleRe: How best proceed with overheating i7-4790K?
I am also seeing abnormally high load temperatures. ASUS Maximus VII Impacti7-4970kL4 batchStock cooling fan applied correctly. I have even taken it off, verified the paste applied, and reseated...
View ArticleEdison WiFi woes
I just tried setting up WiFi for the first time and am at an impasse. Here's the story: 1. With configure_edison --setup I gave my system a name and password, and then got to the WiFi setup. It...
View ArticleDG41TY motherboard
I have an INTEL DG41TY motherboard. I tried booting up using the USB flash drive. All I get is the cursor on the upper left corner of the screen blinking. I know the USB flash drive is working because...
View ArticleRe: Recovering form a bad linux image
(updated @ 17:48 Pacific - added a missed step) FIXED! These are the three main steps to fix a non-booting system that needs to be re-flashed (you will lose lose any files previously placed on the file...
View ArticleRe: Recovering form a bad linux image
Yup this works. Thanks Jeff!For future people with this issue. I did a lot to get this working but I am pretty sure you need the dfu-util installed before ./flashall is going to work. I would love...
View ArticleNUC D54250WYKH1 - What resolutions are supported? WQHD? WFHD?
Hello everyone, this is my first post. I love my NUC and I am enjoying UBUNTU on it. I would like to buy a new monitor but I am having trouble finding the specifics regarding resolution... I see this...
View ArticleRe: Intel AC7260 limited access after sleep
joe_intel - I can't see any downloads for 17.12 - I only see 17.1.0 on the intel site: https://downloadcenter.intel.com/SearchResult.aspx?lang=&ProductID=3714&ProdId=3714 Any idea when this...
View Articlehow to power multiple edison mini-breakout boards
I was wondering if anyone had investigated the best way to power multiple edison mini-breakout boards? Obviously a large number of power-strips and USB type charge is a possibility. I have found USB...
View ArticleRe: how to power multiple edison mini-breakout boards
I would use one power supply (7-15v) and hook it up to J21 on each of the mini breakout boards!
View ArticleRe: Intel HD Graphics driver update posted for HD Graphics 2500/4000 (Ivybridge)
Do you plan on fixing the issue of being locked out of the overscan settings? I just purchased a Zotac CI320 (N2930) Nano and have terrible overscan in Win 8.1 and when I try to adjust the overscan I...
View Article