Re: Can I uninstall Intel Rapid Storage Technology?
I understand. You may then, remove IAStorIcon from the Startup tab in System Configuration. This can be accessed by pressing the Windows* key plus the R key and then enter “msconfig”.Besides the option...
View ArticleRe: TFT screen working under Linux framebuffer driver
One detail that I will mention in case someone else comes along and reads this set of posts:- the touch program opens the device /dev/spidev1.0, which indicates CS=0, so the fbtft_device driver needs...
View Articleexternal eSATA doesn't work on DH67CL
Hi,I recently converted my board to RAID configuration and installed four HDD's into RAID 5. I have another SSD outside the RAID for the OS. So all my internal SATA connections are occupied. I intended...
View ArticleClik here to view.
Looking to buy a D54250WYK but worried about the fan noise.
Hey all. So I narrowed my search down to two compact PC's. The Brix i3 4010 or the NUC i5 D54250WYK. I am 90% sold on the NUC but I have read a number of posts about problems with the noise of the...
View ArticleDN2820FYKH not booting
Dear all, I received my new NUC 2820 today, looking forward to spending the Easter holidays setting it up, but so far it's been a very frustrating experience. I have installed: Crucial CT51264BF160BJ...
View ArticleRe: Looking to buy a D54250WYK but worried about the fan noise.
I bought and installed my D54250WYKH a few weeks ago, and have not updated any drivers. I am running W8.1. At 60-70% CPU load, the fan noise is barely audible. Keith
View ArticleIntel HD4000 and hdmi failure (again) with samsung laptop
Hi. Ive got a samsung NP470R5E-K01UB laptop, i5 3230M chip, Intel HD4000 graphics, windows 8.1. hdmi to my tv screen on laptop goes on and off every 2 seconds for about a minute while recognising tv,...
View ArticleRe: What OS processes will cause intel rapid start/smart connect to wake up?
My own found solution ends up being a partial answer. The wakeup event timers BIOS setting set to OS seems to improve the chances the computer will stay asleep, yet the computer does persist to wakeup...
View ArticleRe: USB 3.0 on the Galileo
Hi. USB 3.0 requires the use of PCI Express slots operating @ 5 GT/s (ie. Gen2 speeds), not Gen1 speed. As was confirmed earlier: Re: SOC X1000 PCIe Gen2 @ 2.5 GT/s ? the mini-PCIe interface is...
View ArticleRe: Yet Another Debian available
Hi, thanks for the image. It works great here on my end. The only issue I've run into is that I'm still seeing segfaults with libpthread-2.13.so but these are isolated specifically to git. Great stuff...
View ArticleRe: Event Viewer: irstrtsv error: Unable to read LBA sector via passthru
Allan,Thanks for the reply, I updated to RST v.12.9 however the new version did not completely solve the problem.Currently, Event Viewer consistently shows a cluster of 3 irstrtsv errors every 5...
View ArticleAcer C720 Graphics Drivers ( Intel HD )
Hi, I have been trying to get Windows 8.1 working on my Acer C720 laptop (chromebook) as have many others, we have been able to get it mostly working aside from video acceleration, which when the Intel...
View ArticleSERVER INTEL S1200BT use more than 6 HD sata
Hello I have the board SERVER INTEL S1200BT and I wonder how do I put more than 6 sata HD, which card and recommended?Or can I use the PCI-E Express Card SATA3.0 MARVELL 88SE9128 Chipset Thanks
View ArticleRe: NUC HTPC Sound issues
Bluescreen when turning on or off reciever D3401WYKH with Crucial 1.35 8GB Kit and Intel 320 SSD. Using latest beta driver posted above...
View ArticleD54250WYK crashes when VP (iScan Duo) is switched off
I have a D54250WYK which is connected to an iScan Duo (video processor and HDMI switch). The iScan Duo is then connected to my plasma TV and front projector. My problem is that when I switch off the...
View ArticleWhy is there a delay in WiFiClient.available() ?
I am trying to use the WiFi library with Galileo and I'm seeing a delay of about 1 or 2 seconds when I call WiFiClient.available() and there is no data available on the connection. Here is the code...
View ArticleRe: Missing Wire.h file in the arduino 1.5.3
The path to Wire.h in Arduino 1.53 is: arduino-1.5.3\hardware\arduino\x86\libraries\Wire\Wire.h. Wire.cpp lives there too. To fix it include Wire.h in your sketch: #include <Wire.h> Bonus fix:...
View ArticleCan Adapters be Recovered?
My DH87MC board with I217v Gigabit Ethernet Controller used a wire connection until I recently installed a Centrino-N 6205 desktop wireless adapter and started using wireless. I just downloaded Intel...
View ArticleNUC stuck on Welcome Screen
DC32171YE After multiple restarts and everything working fine, upon standard daily reboot, the system is locked in the startup screen with no keyboard or mouse. Just locked up. I had more of these...
View Article