Re: Please build in native git support
That was helpful. Are there any other repos you know about? I would still like to get some useful things like vim and nmap.
View ArticleRe: Blinking ethernet connector at startup
Hi Diego, The problem is still the same. So when I plug in the Galileo with the Ethernet connected at starttup it starts blinking the LED on the connector rapidly. This does not stop and has effects on...
View ArticleRe: Intel Dual Band AC 3160 Wifi Works but Bluetooth is not Recognized / Working
Any additional thoughts on this? The Intel drivers don't appear to resolve anything for Bluetooth functionality. I bought a Qualcomm Atheros WLAN/BT mini PCIe card (branded as a Dell DW1703) and popped...
View ArticleQuestion regarding combining image files
Greetings,I'm still new with Galileo and the Makers community and was wondering whether someone could help us out with a problem we're facing.I'm just wondering how is it possible to combine two image...
View ArticleClik here to view.
Galileo Device Cannot Start
I have a Galileo Gen 2.After forcing the driver installation of the Galileo driver, I get an error saying the device cannot start & I cant continue. I am following the instructions on Galileo...
View ArticleRe: Acer Aspire V3-731 and an Intel 3160HMW
I was able to figure out the issue, there was a problem where my motherboard was shorting out due to a metal contact on the keyboard coming into contact with a scratch on the motherboard. I put a tiny...
View ArticleRe: Intel updates in the form of catalog to use with WSUS
Hi Dan, Catalog should be available to customers, following guide gives a detailed architecture and overview on Dell update catalog integration with Microsoft SCCM , WSUS...
View Articlewhy Intel® Quark SoC X1000 chip get hot fast once it powered?
Hi all, Once I power the board via the power adapter with output voltage 6V/450mA and connect it to PC, the Intel® Quark SoC X1000 chip get hot fast. I checked, any arduino board must be rated for a...
View ArticleClik here to view.
Re: why Intel® Quark SoC X1000 chip get hot fast once it powered?
which board? (Gen1 / Gen2?)which firmware?which temperature? (cat /sys/class/thermal/thermal_zone0/temp)
View ArticleRe: How to fix "display driver stopped responding and has recovered" on Intel...
igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32Driver File Version: 8.15.0010.2900 (English) Driver Version: 8.15.10.2900 DDI Version: 10 Feature Levels: 10.0,9.1 Driver Model:...
View ArticleRe: Edison IDE wont open!
Hello: Thank you for your response. I had Edison's Arduino IDE on one drive 't(F:) and the normal arduino on another drive (C:). When I open it I don get any error: The splashscreen opens, and then...
View ArticleOSX linux image updating issues
I have been working on getting my image updated for my Edison boards. I have a smaller dev board model and a larger arduino model. I have followed the instructions copied over the files into the...
View ArticleEdison capabilities inquiry.
From a review of the hardware guide, and otherwise given the fact that the on-board DDR ram appears to be integrated into the SoC, am I correct in understanding that there is no direct means to access...
View ArticleRe: how to connect Galaxy note 10.1 to Samsung TV with WiDi
You will get a better response in the Intel WiDi forum. I have moved your post there. Doc
View ArticleRe: Replace Android with Windows or Linux Distro
You will get a better response in the General Discussion forum. I have moved your post there. Doc
View ArticleDell Inspiron 7737 with Intel i7-4510U CPU not showing correctly in Windows 8.1
Hello Everyone, I recently bought the Dell Inspiron 7737 laptop from Futureshop, in Canada. The specs are as follows; x64 base PC win8.1-home edition(I know, I know, just haven't the time to update to...
View ArticleRe: Help! If you have a 7200rpm internal drive, what are your temps?
Hi again! The RPS is WD's optimized spin up feature. 2.5-inch drives are configured to spin up using minimal power consumption. This is triggered (when the certain jumper settings are made) during spin...
View ArticleRe: Programming GPIO Ports From Linux
PengWan wrote: Are you saying that the previous steps in Linux is not working anymore and I should use DevKit to make it works?no, I am not. I am just saying that using libmraa / UPM...
View ArticleClik here to view.
Re: PXE Boot
We also have problems with the same NUC D54250WYK with the latest BIOS update 28, does anyone have a fix for this?
View ArticleRe: Please build in native git support
I second the need for git. Among other things, the lack of git also breaks many Node.js package installations (i.e. I wanted to install the npm package node-core-audio to use USB audio from Node, but...
View Article